| Customization: | Available |
|---|---|
| Automatic Grade: | Automatic |
| Material Type: | Liquid |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Soft drink machinery, Carbonated drink rinsing filling capping machine
Pet bottle and glass bottle
Screw capping and press capping cap
Capacity from 1000-25000 bottles per hour
Lubrication system
SUS 304 or 316 materials
PLC controller
Suitable for the different types bottle 200ml-2000ml
Feeding conveyor:
1. Easily to change the bottle shape
2. Rise the speed
3. Connect the bottle feeding part
4. Could add the bottle stopping device
5. Air conveyor for the plastic bottle, screw conveyor for the glass bottle
Washing part
1. Inverter clamp to pick up the bottles by catch the bottle neck
2. SUS304 stainless steel
3. Spraying nozzle could reach all the parts of the bottle, save the washing water
The bottle will be feed into the machine through the conveyor to the first part is rinsing part, there are many support seats and the bottle grippers, The grippers take the bottles from the inlet star wheel while they are still driven by the star wheel, thus guaranteeing a safe grip.
The bottle is turned upside down and centered above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again.
Filling part
1. No bottle no filling
2. Same filling level of all the bottles, adjustable filling level
3. Filling precision ≤±2mm
4. Isobaric filling method
5. Lower temperature 0-3
6. No dropping
7. Filling volume adjustable in fine rank, same liquid level after filling
8. All 316L stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean
For the carbonated drink, the most special with others drink is the filling temperature, it like the beer, the temperature is very cool, below than 4 degree, also contains some foam inside, so the filling valve should use the cooling filling way, also should can draw out the foam from the drink
A balance filling method (D type) is used in carbonated beverage or soft drinks in bottles The handle of the machine can be freely and conveniently turned to adjust the machine capacity and to fill various size of bottles. The filling operation is faster and more stable because the new isotonic pressure filling operation of the new type is adopted.
Capping part
1. PCO, plastic cap, metal cap, aluminum cap
2. No bottle no capping
3. Two sensor to check, PLC control
4. Place & capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
5. All 304stainless steel construction
6. Automatic stop when lack of bottle
7. Automatic caps arranging and feeding, lack of caps automatic feeding
Lamp checker
Clearly to see the filled bottle
Electrical apparatus
PLC/ transducer/ touch screen: Siemens
Contactor/ air switch/ stabilized voltage supply: Schneider
Photo electricity/ proximity switch: Atonics
Cylinder: Air tack
){kind=link}