Negative glass bottling machine, Liquor glass bottling machinery, alcohol glass bottle filling machinery,Alcohol production line
The series equipment is used in production liquor, wine, soy vinegar etc.
Pet bottle and glass bottle
Screw capping and press capping cap
Capacity from 1000-25000 bottles per hour
Lubrication system
SUS 304 or 316 materials
PLC controller
Suitable for the different types bottle 200ml-2000ml
Feeding conveyor:
1. Easily to change the bottle shape
2. Rise the speed
3. Connect the bottle feeding part
4. Could add the bottle stopping device
5. Screw conveyor leader
Washing part
1. Inverter clamp to pick up the bottles by catch the bottle neck
2. SUS304 stainless steel
3. Spraying nozzle could reach all the parts of the bottle, save the washing water
The bottle will be feed into the machine through the conveyor to the first part is rinsing part, there are many support seats and the bottle grippers, The grippers take the bottles from the inlet star wheel while they are still driven by the star wheel, thus guaranteeing a safe grip.
The bottle is turned upside down and centered above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again.
Filling part
1. No bottle no filling
2. Same filling level of all the bottles, adjustable filling level
3. Filling precision ≤±2mm
4. Negative pressure filling valve
5. Normal temperature
6. No dropping
Because the liquid is corrosive, so the filling part should not use the, the better we use the chimerical rubber as the filling pipe.
The liquid level of liquid vat keeps constancy liquid level and 1 air pressure under automatic controlling of liquid inlet valve. When the liquid valve liquid-inlet perch entering bottle, after sealing seals the bottle mouth, the air suction will start and setup negative pressure (vacuum), at this time, the liquid in liquid vat entering into bottle under function of pressure error. When the liquid level surpass liquid perch air suction hole, the pressure error will disappear, and air suction out stops, the filling finish.
Capping part
1. PCO, plastic cap, metal cap, aluminum cap
2. No bottle no capping
3. Two sensor to check, PLC control
4. No full no capping
5. Place & capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
6. All 304stainless steel construction
7. Automatic stop when lack of bottle
8. Automatic caps arranging and feeding, lack of caps automatic feeding
Recycle tank and pump
Because the liquid contains the foam, so not only the valve has the degas feature, we also need the fit the vacuum pump and tank, to suck all the foam from the liquid, and send to the vacuum tank through the vacuum pump
Lamp checker
Clearly to see the filled bottle
Electrical apparatus
PLC/ transducer/ touch screen: Siemens
Contactor/ air switch/ stabilized voltage supply: Schneider
Photo electricity/ proximity switch: Atonics
Cylinder: Air tack
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}